König Holz und Harz sanding primer is a sanding sealer that makes sanding wood surfaces easier.
It does not close the pores, strengthens the wood fibers and raises them.
This ensures a noticeably better grinding result and a very smooth surface.
The sanding base is the perfect basis for waxed or high-gloss surfaces.
It is advisable to use a sanding base for every sanding job after the first sanding process.
 
Why use Sanding Sealer? 
By applying König Holz's sanding base and resin during the sanding process, the folded wood fibers can be removed.
When sanding, some wood fibers are folded over and not completely removed.
Even if the surface appears smooth after sanding, the folded wood fibers would straighten up again once stain, paint or other products were applied. This would result in a rough surface. 
If you apply the sanding base before and during sanding, the folded fibers soak up, straighten up and harden.
Since they remain in a fixed position after drying, they can be completely removed in the subsequent grinding process.
It only takes a few minutes to cure. 
 
It is advisable to use a sanding base for every sanding job after the first sanding process.
 
The most important properties:
Made in Germany
No additives
No cellulose
No nitro dilution
Dries very quickly
 
Directions:
The grinding base can be used directly and does not need to be shaken before use. It should be stored at room temperature. 
 
 
What can Sanding Sealer be used for? 
As a base for wax surfaces, carnauba resin, polishing pastes or the friction polish from König Holz und Harz. 
Abrasive base is an ideal basis for high-gloss surfaces
Whenever the surface should be as smooth as possible, for example with hand flatterers
For an even smoother surface when sanding
If the sanding primer is applied to open-pored end-grain wood or open-pored areas, the end-grain wood is prevented from turning darker than the rest of the surface
Bush-hammered wood can also be strengthened with the sanding base.
 
Texture of the wood
The wood should be dry for processing. But it can also be used on wet wood. The drier the wood the better.
The sanding base is equally suitable for hard and soft wood.
The substrate should be untreated.
Before the first application, the King wood and resin grinding pasterough be used.
 
Gloves are recommended when working with König Holz Harz Schleifgrund, as the alcohol can dry out the skin.
First sand the workpiece with the first grit, depending on how good the surface is.
Then apply a little sanding primer with a cloth.
Wait 2-3 minutes and then sand with the next grit.
Repeat as needed to your desired grit. 
 
The application can take place on the lathe as well as on the workbench.
 
Contents:
250ml
Data Sheets