Red and white polishing paste
 
The top-gloss anti-hologram polish is extremely fine-grained and creates a brilliant high gloss on all intact and especially dark surfaces. It also removes holograms, streaks and etchings on metallic, effect and water-based paints.
Suitable for paint, acrylic, metal, GRP, gelcoat and plastic. The polishing paste is absolutely free of wax, grease and silicone. Grain Equivalent = 25,000
Danger:
In general, you should always try to treat the existing damage first with a finer polishing paste in order to avoid unnecessary material removal.
 
The surfaces are processed with sandpaper up to at least 2000 ship. If you sand up to approx. 2000, you should use thepolishing pastebegin and then theTop gloss anti-hologram polishuse. You can process the paste by hand or with a polishing machine.
 
The ROTWEISS polishing paste was developed to work up weathered paintwork and many surfaces that have become dull and to remove scratches. The polishing paste is one of our top-rated products and multiple test winners.
 
The polishing paste is suitable for manual and machine use on paintwork, metals, acrylic, GRP, gelcoat and plastics. It has high-quality homogeneous abrasives and therefore offers excellent results with easy processing. Flash rust and surface scratches are easily polished out, blind and weathered layers of paint can be removed effortlessly. The polishing paste also removes insects and weather-beaten surfaces from hard rubber, eg on skirting boards. The polishing paste is absolutely free of wax, grease and silicone and is therefore also perfect for subsequent painting or foiling work.
 
Grit Equivalent = 6,000
 
ROTWEISS customer survey 2016: Most popular ROTWEISS product - "1st place".





 
Danger:
The polishing paste may leave slight cloudiness on sensitive/dark paintwork, whichROTWEISS top gloss anti-hologram polishcan be polished out.
In general, you should always try to treat the existing damage first with a finer polishing paste in order to avoid unnecessary material removal.
 
processing
Shake the bottle well before use.
Apply a small amount to a polishing pad and surface.
Rub the polishing paste over the part to be polished while the polishing machine is still switched off.
Start polishing. Provide high speed to get the best result.
Watch out for burning/heating by not buffing in one spot all the time.
Rub the surface with a clean cloth.
 
Step 1 - Clean
Clean the surface. It is important to remove dirt, dust, grease and wax and to rinse the surface thoroughly with low-lime water.
 
Step 2 - Polishing
Polish by hand or machine in sections in areas that can be worked at once. keep moist, e.g. B. with a water spray
 
Step 3 - Finishing
Remove product residue with a damp microfiber cloth . Then process the surface further or finish it off with a seal, e.g. B. ROTWEISS spray wax protect.
 
success test
The surface should look uniform after polishing and deep scratches or runs should have disappeared. Repeat treatment if necessary or withROTWEISS top gloss anti-hologram polishrework.
 
Content: 150 grams