Impression silicone made of silicone rubber, addition-curing, two-component, Shore A 22.
 silicone rubber
 
 Silimold Silicone is perfect for making challenging reusable molds.
 The silicone is characterized by its high elasticity, thin-flowing and self-venting properties, which means that detailed and air bubble-free impressions can be created.
 It is also considered gentle and, above all, non-toxic.
 Easy detachment of the models due to excellent non-stick effect
 
 Application areas:
 Production of hard-wearing, detailed, elastic and demanding molds from casting resins (including epoxy, polyester, polyurethane resins), soap casting, mineral materials (eg gypsum, concrete).
 
 Specifications:
 Processing time approx. 7 minutes
 Curing time at least approx. 25 minutes
 Demouldable after 45 minutes
 Addition curing
 Hardness: Shore A 22 (after 24 hours) (Iso868)
 Density: 1.05 g/cm3 (high purity)
 Heat-resistant: up to 180 °C (briefly 250 °C)
 Frost resistant: at least down to -45 °C
 Shelf life: unopened 2 years
 Storage: cool (< 25 °C), dry, dark
 Processing: at room temperature, at least 15 °C
 Shrinkage: < 0.1%
 Viscosity: 2,500 (mPas)
 Elongation at break: 400
 Tear strength: 3.0 N/mm
 Tear resistance: 5.0 N/mm2
 Solvent-free
 non-toxic
 Non-flammable
 Not corrosive
 Not harmful in contact with skin
 
 Application:
 Mix: 1:1 by weight. Mix slowly and thoroughly for 1-2 minutes until a streak-free, uniform blue color is achieved.
 Pour out: Pour from a great height in a narrow stream to achieve a result that is as bubble-free as possible.
 Times: processing time approx. 7 minutes and curing time approx. 25 minutes at 23 °C, can be removed from the mold after 45 minutes.
 
 Content: 1 kg
 
 Data Sheets